Browse Categories
Shopping Cart
Your cart is empty.

Premire Line Switches

Pemiere Line Switches are built with the same quality as our Super Line Switches but are built to scale. Which means they are generally longer and more gradual than the space saving Super LIne. All of our switches are available 4 ways. Manual switches are not pre wired for the train to run from one end of the switch to the other. A switch is a good place to end a block, so you dont have to make a cut or use a fiber pin for insulating. Manual pre wired switches are solidly wired here at the factory so you can just drop them in and go. We sell Caboose Industries ground throws separately if you want something to lock the points over, #208-S.Switches also come with the DZ1000 switch machines or the DZ2500 switch machines pre wired and installed ready to run. The dz-1000 snaps back and forth. It is lighted and can be thrown without power. Non derailing is built in but you need to run two wire (typically under the table) to hook that feature up. Use 18 gauge wire between included controller and switch machine. Can be used with the DZ1008 relay.

The new DZ-2500 Switch Machine offers slow speed switching from the pushbutton, TMCC CAB-1 remote, or DCS remote with the AIU. Just provide accessory power and ground to your DZ-2500 and to the DZ-2502 Remote pushbutton. Only one control wire is required to operate from the remote pushbutton. Using a DZ-2001, you can create a DATA WIRE that you run from your Command Base to anywhere on your layout (this creates a “data wire buss”) and then connect the DZ-2500 to it using only a single wire.  You cannot throw these machine manually they must have power. In our opinion here at RCS if you are not going to throw the switches with the Legacy or TMCC handheld you may not want to spend the extra $.
Compatible with GarGraves, Ross, Curtis, Atlas switches.

 • Realistic slow speed switching
• Fast switching for non-derailing operation
• Easy, pushbutton setting of red and green LED lights
• TMCC capability built-in - just connect to a DZ-2001 Datawire
DCS / 2-Wire mode for compatibility with DCS AIU and old DZ-1002 remote
• Can be used with DZ-1008 Relay Module
• 2/3rds the length of the DZ-1000
• Low Profile with screws and springs below rail height
• Pigtail wires instead of screws
• Single Button remote - no more guessing!

Displaying products 1 - 17 of 17 results
unavailable
#10 Left-hand
Price: $119.95
#10 Left-hand
unavailable
#10 Right-hand
Price: $119.95
#10 Right-hand
unavailable
#4 Left-hand Switch
Price: $64.95
#4 Left-hand Switch
unavailable
#4 Right-hand Switch
Price: $64.95
#4 Right-hand Switch
unavailable
#4 Three Way
Price: $249.95
#4 Three Way
Because of the length or configuration of these switches they may require 2 relays to operate without power interruptions. This depends on the pickup roller distance on your engines. The DZ1008 relay is recommended.
unavailable
#6 Curved Right-hand
Price: $89.95
#6 Curved Right-hand
unavailable
#6 Left-hand Switch
Price: $74.95
#6 Left-hand Switch
unavailable
#6 Right-hand Switch
Price: $74.95
#6 Right-hand Switch
unavailable
#8 Curved Left-hand
Price: $109.95
#8 Curved Left-hand
Because of the length or configuration of these switches they may require relays to operate without power interruptions. This depends on the pickup roller distance on your engines. The DZ1008 relay is recommended.
unavailable
#8 Curved Right-hand
Price: $109.95
#8 Curved Right-hand
Because of the length or configuration of these switches they may require relays to operate without power interruptions. This depends on the pickup roller distance on your engines. The DZ1008 relay is recommended.
unavailable
#8 Double Crossover
Price: $519.95
#8 Double Crossover
RossReady versions include 4 dz1008 relays.
unavailable
#8 Left-hand Switch
Price: $89.95
#8 Left-hand Switch
unavailable
#8 Right-hand Switch
Price: $89.95
#8 Right-hand Switch
unavailable
Double-Slip Switch
Price: $199.95
Double-Slip Switch
(#4 frog angle)Because of the length or configuration of these switches they may require 2 relays to operate without power interruptions. This depends on the pickup roller distance on your engines. The DZ1008 relay is recommended.